| Canadian Trappers Talk Forum http://www.trapper.ca/cnta/ |
|
| WTB .22 Mag http://www.trapper.ca/cnta/viewtopic.php?f=13&t=1655 |
Page 1 of 2 |
| Author: | Berh307 [ Tue Apr 14, 2009 2:30 pm ] |
| Post subject: | WTB .22 Mag |
Hi beaver season just around the corner and I am looking to replace my mistake . I am looking for .22 mag would prefer Marlin ( ask I have parts from first mistake IE stock scope bi pod) Or another brand of .22 mag Thank you !! |
|
| Author: | parfleche [ Tue Apr 14, 2009 7:58 pm ] |
| Post subject: | Re: WTB .22 Mag |
What seems to be the mistake! Make? Model? You may find different ammo works better ? I own a Ruger and am not sorry in the least, I shoot Winchester Supremes hollow point for Beaver and find them excellent . Other brands were not as good. |
|
| Author: | bctrapper [ Wed Apr 15, 2009 2:12 am ] |
| Post subject: | Re: WTB .22 Mag |
I shoot a Marlin 22 mag. bolt that I got from Wholesale Sports. I really like it. I use Remington Premium. They are a lead tipped bullet. I tried hollow point and FMJ and did not care for them. Don |
|
| Author: | Berh307 [ Thu Apr 16, 2009 12:30 pm ] |
| Post subject: | Re: WTB .22 Mag |
my mistake was the operator behind the trigger ... I was packing getting ready for a beaver hunt and I thought to myself hmmm I should clean it . I didnt have the proper tools ( Note to self dont do that again ) Got a part of a cleaning rod and a rag jammed in the barrel ....... Gun smith cant get it out So I got this marlin bolt action that i cant use |
|
| Author: | parfleche [ Thu Apr 16, 2009 3:16 pm ] |
| Post subject: | Re: WTB .22 Mag |
Can you get the gunsmith to take the barrel off? What make of gun was it? |
|
| Author: | parfleche [ Thu Apr 16, 2009 3:18 pm ] |
| Post subject: | Re: WTB .22 Mag |
Sorry never noticed make you posted! |
|
| Author: | Berh307 [ Thu Apr 16, 2009 5:39 pm ] |
| Post subject: | Re: WTB .22 Mag |
parfleche wrote: Sorry never noticed make you posted! No worries friend. thats why I like to find another Marlin because I have spare clips , bi pod and rife stock |
|
| Author: | tom44 [ Thu Apr 16, 2009 5:56 pm ] |
| Post subject: | Re: WTB .22 Mag |
Berh307, find yourself another gunsmith. What you describe ( rag in barrel ) should not be difficult to correct with the proper tools. Good luck. |
|
| Author: | Berh307 [ Thu Apr 16, 2009 7:22 pm ] |
| Post subject: | Re: WTB .22 Mag |
tom44 wrote: Berh307, find yourself another gunsmith. What you describe ( rag in barrel ) should not be difficult to correct with the proper tools. Good luck. Yes a rag and part of a cleaning rod ... The problem was me panicing to remove the piece my self , They figured that with me pounding on the broken of rod from both ends that I have flared it out too much to remove.... Me dumb Me should'nt be allowed near heavy equipment or fagile things  me go back to cave |
|
| Author: | white316 [ Thu Apr 16, 2009 7:33 pm ] |
| Post subject: | Re: WTB .22 Mag |
i wood find a piece of steel rod the same size as the bore,,and beat it out[can't hurt anything] |
|
| Author: | parfleche [ Fri Apr 17, 2009 1:42 am ] |
| Post subject: | Re: WTB .22 Mag |
I think a good gun smith will do the trick. Have him take the barrel off if need be , Then you need to disolve the rag, that will likely allow for the rod to be pressed out. PHONE ; RON SMITH @ wimbourne , alberta,403-631-2405 or Dave Henry Bently AL 403-748-3030 IF neither of those two know what to do , pray |
|
| Author: | Berh307 [ Fri Apr 17, 2009 12:04 pm ] |
| Post subject: | Re: WTB .22 Mag |
parfleche wrote: I think a good gun smith will do the trick. Have him take the barrel off if need be , Then you need to disolve the rag, that will likely allow for the rod to be pressed out. PHONE ; RON SMITH @ wimbourne , alberta,403-631-2405 or Dave Henry Bently AL 403-748-3030 IF neither of those two know what to do , pray Hey thank you I call those guys and see what they can do for me ... I was out having breakfast this moring talking to a guy I know and telling him about this gun. He figures he can get it out by using an acid that would take care of the rag. ( He owns a machine shop) He told me he uses the acid for etching alunim(sic) I figure that should soften the alunim (sic) clean rod as well. He said he make a stainless steel rod and be able to press the problem out.. I think it sounds good !!! Thank you guys for you comment and suggestions !! Berh |
|
| Author: | trapp [ Fri Apr 17, 2009 12:04 pm ] |
| Post subject: | Re: WTB .22 Mag |
If you do try tapping it out with a rod use a really good lubricant. A product called " Move It" I find is far superior to WD40. |
|
| Author: | parfleche [ Fri Apr 17, 2009 4:33 pm ] |
| Post subject: | Re: WTB .22 Mag |
RON tried finding move it , but have not been successful, where do you get yours? |
|
| Author: | dboles [ Sat Dec 05, 2009 1:51 am ] |
| Post subject: | Re: WTB .22 Mag |
9 will get you 10 Ron says Princess Auto in Kelowna BC.I think the product name is movit should find it somewhere easy Canadian Tire Maybe. Good luck on the removal I have a 22mag in Marlin and its a sweet shooter hate to loose it Dan'l |
|
| Page 1 of 2 | All times are UTC - 4 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|